White Cream Carbon Fiber Resin , Epoxy Cement Glue Moist Surface Adhesion

Epoxy Structural Strengthening Carbon Fiber Adhesive With High Bonging Strength

Carbon Fiber Primer

Carbon Fiber Leveling Adhesive

Carbon Fiber Reinforced Polymer

Epoxy Structural Strengthening Carbon Fiber Adhesive With High Bonging Strength

Xinchor CFRP Carbon Fiber Adhesive is Low viscosity, strong penetration ability, used for smearing of the underlayer of reinforced members' surface, the role is penetration bonding reinforcement to the broken concrete after chiseling off; of the surface of members was intact, smearing was not needed.

Two components in separate plastic barrel, 30kgs/set, Mix ratio (weight) A:B=2:1

Shall be stored in cool (between 10-35℃), dry and ventilated place, not exceed 1 year.

Toxic free, non dangerous, can be shipped as normal chemical materials.

Basic parameters

1) Appearence

Part A (main): transparent liquid

Part B (hardener): Brown transparent liquid

2) Mixed Viscosity: 4000-6000 Pa.s

3) Hardened density: 1.10±0.10g/cm³

4) Available handling time: (25℃): ≥30min

5) Shelf time: 24 months

Features:

1, has excellent physical properties, tensile strength of more than 10 times higher than that of ordinary steel, modulus of elasticity is close to steel. Suitable for reinforcement of Steel bar concrete structure;

2, widely used in bending, shear, compression reinforcement of section unit, seismic strengthening of structures and masonry reinforcement;

3, the weight proportion is only 1/4 to steel, thickness of each layer is less than 1mm, almost no increasing the weight and size of the original structure;

4, no need with large construction equipment, no other fixed facilities, short construction period;

5, good corrosion resistance and durability;

6, compared with steel-adhered reinforcement methods, lower cost, easier for construction quality assurance.

carbon fiber repair epoxy

carbon fiber glue epoxy

White Cream Carbon Fiber Resin , Epoxy Cement Glue Moist Surface Adhesion Images